Sliding Fire Doors: The Ultimate Buying Guide

The sliding fire doors are typically suspended with an overhead guide for straightforward operation on the carriage with protected rollers. They are steered at the bottom by the bearings system concealed on the side of the enclosure opposite the section. The primary factor to consider when establishing a sliding fire door is frequently available space because it may restrict your alternatives. Finding the proper location is crucial if you want to utilise these doors for fire prevention; otherwise, it might not be viable.

Use of Sliding Fire Doors

You can consider something else, such as a sliding fire door when typical swing doors are not an option. They are frequently found in hospitals. They are an effective solution to installing a compliant fire door because they don’t open inwards or outwards. A sliding fire door is a much-needed alternative to standard doors because it allows hospitals to move beds more effectively. 

If your situation is similar, installing sliding fire doors could be necessary to comply with Australian building codes and safety laws. These doors are often built using motion sensors, but they may also be placed using a system of weights and pulleys. Optical sensors are typically found in retail malls and hospitals since these buildings must automatically open anytime movement is detected.

Additionally, they may be modified based on your demands. The frames may be adjusted to accommodate your room and the doors. Since sliding fire doors may also be produced as fire-resistant doors, more and more enterprises are also opting for this alternative. Last but not least, a wide variety of materials are available to you, including metal, fibreglass, glass, steel, lumber, and aluminium. Hospitals frequently utilise lead cladding to prevent the transmission of x-ray radiation. Radiation doors are what these doors are called. 

What is the Sliding Fire Door Type Best?

Sliding doors are incredibly adaptable in that they may meet various demands. You should be able to select from the ideas we go over once you understand the size of the area you have available. The solutions accessible will also depend on fire protection and the laws to ensure everyone inside is safe. The several door configurations are shown below for your consideration.

Single Leaf

This will be your most excellent option if you have a small entryway or narrow hallways because they are straightforward and effective.


A dual-fire door is a luxury choice if you need more space. If you have more room than the two previous requirements but have ruled out the possibility of a hinged door, this will enable the ideal solution.

Triple Or Parallel

The benefit of this gate is that it serves as a temporary wall, making it the ideal option if space is at a premium.


It is feasible to build a vertical door if your selected space is broad rather than tall. However, this choice is less common than the others. You may opt for automated operation or even manual control via a mobile device.

To provide you with the maximum safety and security, the experts may even mix designs if they believe it is worthwhile. Your doorway will always feature electromagnetic components that close when an emergency occurs, regardless of your selected method. The building code established this safety measure to stop smoke and fire from spreading to other areas that may cause more significant harm.

You may now have all the information you require to decide in light of the above facts. If you have any questions, all it takes is a quick call or email to obtain professional guidance from a fully licensed and experienced specialist.

Architecture components and passive fire prevention present several difficulties in large commercial buildings. The prevalence of open-plan designs has made it more challenging to use fire doors since there are fewer partitions. Fire curtains can be erected where fire doors can’t be used.

What Are Fire Curtains Used For?

Fire curtains function to reduce smoke and fire levels before they spread over a particular area of the structure. Since they are frequently lightweight and seldom require additional support while erecting, the addition of a fire curtain hardly ever alters the form of a building.

Depending on the needs of the structure, fire curtains could be fastened to the face or installed into the walls and ceiling. Because of their gravity, fail-to-safe operations will remain stationary and covert, ready to drop when necessary in a fire event, even if all regions of power are not readily usable.

A building’s architecture can be divided into discrete divisions by including fire curtains. The prevalence of open-plan designs has made it more challenging, if not difficult, to include fire doors in areas with a shortage of wall space. Nearly any size may have fire curtains placed.

In General

The fire security and protection strategies for a structure must include fire doors. To provide building occupants enough time to evacuate safely, sliding fire doors and fire curtains are designed to delay or stop the spread of fire and smoke. The fire curtain is a fantastic door substitute as it can deliver equal fire protection and smoke control levels. Although fire doors have more advantages than fire curtains, the choice of door depends mostly on you and your interests.

Latest posts

Related articles